Manually Operated Pressure Controller

• Single channel configuration
• Pneumatic operation from vacuum to 1 000 psi
  (7 MPa) or 3 000 psi (21 MPa)
• High precision manual pressure control
• Well suited for use as pressure controlling
   mechanism in calibration testing systems
• Ideal for working with gas operated piston gauge
  or reference pressure monitor

Manually Operated Pressure Controller
for Differential Pressure

• Manually set and adjust pressure between
   atmosphere and 1 000 psi (7 MPa)
   or 3 000 psi (21 MPa)
• Two channel configuration for setting and
   adjusting differential pressure
• Well suited for use as pressure controlling
   mechanism in calibration testing systems
• Ideal for working with gas operated piston gauge
  or reference pressure monitor

Manually Operated Pressure Generator/Controller for Hydraulic Pressure

• Economic solution to manually generate and
  adjust pressure from atmosphere to as high
  as 200 MPa (30,000 psi)
• Generates large pressure changes quickly
  and adjusts pressure precisely at a setpoint

• Self-contained design with compact
   26 cm x 44 cm (10.2 in. x 17.3 in.) footprint
• Includes two (2) test ports, with standard
  high pressure gland and collar fittings
• Ideal for working with oil operated piston gauge
  or reference pressure monitor

Hydraulic Pressure Generator/Controller

• On-demand pressures up to 200 MPa
   (30 000 psi)
• Very high resolution pressure control with
   pushbutton adjustment
• Effortless operation
• Self-contained design with compact 30 x 54 cm
  (12 x 21 in.) footprint
• Half-turn metering valves cannot be overtightened
• No "end stroke"
• Ideal for working with high pressure
   oil operated piston gauge or
   reference pressure monitor

High Gas Pressure Controller

• GPC1-16000 sets and adjusts high pressure
  gas up to 110 MPa (16 000 psi),
  GPC1-10000 sets up to 70 MPa (10 000 psi).
• Operation requires no physical exertion
• Very high resolution pressure control with
  push button adjustment
• Used with both piston gauge and transfer
  standard based test and calibration systems
• Self-contained design with compact
   30 cm x 54 cm (12 in. x 21 in.) footprint
• Half-turn metering valves cannot be
  overtightened
• No "end of stroke" variable volume
  limitations
• High quality, long life construction
• Advanced ergonomics
• Ideal for working with high pressure
  gas operated piston gauge or
  reference pressure  monitor

Gas Booster

  • Intended as high pressure source for calibration
  and test systems (i.e. high pressure gas
  controller/calibrators and piston gauges)
• Hands free and self regulating package - can be
  mounted out of the way (under a bench or behind
  a partition)
• Two high pressure output ranges:
  - GB-75: pressure up to 10 000 psi (70 MPa)
  - GB-K-152: pressure up 15 000 psi (103 MPa)

Gas Booster Package

• Designed to provide a regulated high pressure gas   output to PPCH-G

• Two regulators allowing control of two
   independent pressure outputs
• Two high pressure output ranges:
   GB-H-152-70M:
   pressure up to 100 MPa (15000 psi)
   to supply PPCH-G-70M

   GB-H-152-100M:
   pressure up to 120 MPa (18000 psi)
   to supply PPCH-G-100M

Self Purging Liquid Trap

Free standing accessory designed to protect PPC3™ from liquid contamination from the system or device under test

Constant Volume Valve
Pneumatically actuated needle valve with
a return line connecting the inlet to a
coaxial compensator. Needle displacement
is matched by an equal and opposite volume displacement on the compensator.  Used in
piston gauge crossfloats and other
applications in which two high pressures
need to be disconnected and reconnected
with minimal purtuRbations on either side.